tile drill with radial tool |
|
|
|
Art. 01/M019/0018
|
THE DRILL WITH RADIAL TOOL
|
|
For the drilling of glazed/enamelled wall tiles.
|
The drill is applied to the soft side of the tile, therefore no contact by the cutting tool the glazed edge. A regulator adjusts both the tool feed and rapid return. The radial cutting tool is adjustable to suit a wide range of hole diameters. All models come with a central bit to align the hole and control the cut to improve accuracy. Finally the hole is finished off by using the specially pointed tile hammer on the glazed side of the tile to gently tap out of excess.
|
|
FOR MORE INFORMATIONS PLEASE CONTACT:
|
info@comecoitaly.com
|
